Suitable rubbers for Joola Rossi Emotion
Printed From: Alex Table Tennis - MyTableTennis.NET
Category: Equipment
Forum Name: Equipment
Forum Description: Share your experience and discussions about table tennis equipments.
Moderator: haggisv
Assistant Moderators: position available
URL: http://mytabletennis.net/forum/forum_posts.asp?TID=75086
Printed Date: 04/18/2024 at 7:43pm
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: Suitable rubbers for Joola Rossi Emotion
Posted By: ronakvyas86
Subject: Suitable rubbers for Joola Rossi Emotion
Date Posted: 04/07/2016 at 11:27am
|
I've ordered a Joola Rossi Emotion Cpen and I'm wondering which rubbers should I put on it. I'm presently playing with Nittaku septear with donic acuda s1 turbo of both sides. I play with the penhold grip (offensive looping) and use traditional Chinese backhand for blocking and RPB for attacking. I play best at close and mid distance from the table. Following rubbers I have in mind but I'm having difficulty choosing the right ones. Donic acuda s1 turbo, my current rubber (too heavy and not so spinny, IMO) Donic acuda s2 Donic bluefire m2/m3 Donic baracuda Tibhar aurus Tibhar evolution mx-p Yasaka Rakza 7 Besides these any other rubber, other than tenergies and andro rubbers, you may also suggest ------------- Yasaka Goiabao 5 CPEN, Donic Baracuda MAX FH & RPB |
Replies:
Posted By: AMonteiro
Date Posted: 04/07/2016 at 3:27pm
|
If you use S1 Turbo both sides you can go well with MXP both sides, Bluefire M1 both sides or Rakza 7 both sides.. I would go with Rakza because it's lighter and also has no big drop in performance over the time like Evo e Bluefire, unless you can boost them over the time. ------------- Dynaryz AGR /Yasaka Goiabao 5 / Dynaryz AGR |
Posted By: Jolan
Date Posted: 04/07/2016 at 5:51pm
|
Why not using joola rhyzm ? Aruna does and what is OK for him should be OK for you. When I use to play this blade, I loved rhyzm on it. It matches perfectly. ------------- Joola Wyzaryz Freeze Vega pro 2.0mm Vega intro 2.0mm Blade collection : https://photos.app.goo.gl/PrgCu5ib5RnhVXTn9" rel="nofollow - https://photos.app.goo.gl/PrgCu5ib5RnhVXTn9 |
Posted By: ronakvyas86
Date Posted: 04/08/2016 at 2:36am
|
I heard rhyzm is not so durable. True? ------------- Yasaka Goiabao 5 CPEN, Donic Baracuda MAX FH & RPB |
Posted By: ronakvyas86
Date Posted: 04/08/2016 at 4:52am
I'm having difficulty selecting soft or hard sponge rubbers. Some say that it's carbon blade so soft rubbers are better while others argue that since top ply is hinoki so medium hard to hard rubbers will be more appropriate.  ------------- Yasaka Goiabao 5 CPEN, Donic Baracuda MAX FH & RPB |
Posted By: AndySmith
Date Posted: 04/08/2016 at 5:14am
|
It's always a trade-off. With the JRE, the carbon is buried quite deep in the blade so it isn't as prominent as it is in some blades. Also, the hinoki outer is quite thin (and the medial is koto) so you don't get the pillow-soft feel of something like a Zetro Quad. So I would stick with whatever you're most used to using and not worry about it too much. BTW, Rhyzm is a durable rubber, certainly up there with the majority of ESN rubbers.
|
Posted By: ronakvyas86
Date Posted: 04/12/2016 at 10:06am
|
Sadly, Rakza and Rhyzm are not in stock at my dealer's store. Here's the rubber combinations I came up with: 1. Evo mx-p of both sides - This is just exciting. But, I'm a little worried about the weight and whether I'll be able to control it easily as I'm getting a composite blade for the first time. 2. Baracuda on both sides - People say that baracuda is like baby tenergy 05 a with the high throw and lotta spin but more control as its not that fast. But again, some people are saying that it needs a hard blade to work well and rossi emotion has hinoki top play so, not very hard. 3. FH baracuda and Coppa x1 turbo platin on BH - Coppa x1 turbo becoz my RPB lacks power, spin is not an issue there. But again, some says it doesn't go well with blades with hinoki top ply. 4. Acuda s2 both sides 5. Acuda s1 both sides 6. Bluefire M2 both sides 7. Acuda s1 turbo both sides - my current combination. Don't like the weight though ------------- Yasaka Goiabao 5 CPEN, Donic Baracuda MAX FH & RPB |
Posted By: jackass22
Date Posted: 01/27/2020 at 6:56am
|
Can you recommend which rubber does suit well with joola rossi emotion. I would like to try joola rhyzm -tech (Joola pistej plays with it). What are your experiences? I preffer softer rubber, but i affraid that combinaton rossi emotion and soft rubber will be not good. I play brush loop both wing and counter, blocsk very close to table.
|
Posted By: darkmoor
Date Posted: 01/31/2020 at 10:50am
| Soft rubbers shouls be just fine. I once played JRE wirh Maxxx-P and the feeling was great. |
Posted By: jackass22
Date Posted: 03/13/2020 at 5:44pm
| and acuda s2 or another medium soft rubber? |
Posted By: GSOM_GSOM11
Date Posted: 03/14/2020 at 4:06am
| Tried Rhyzm on Emotion and it worked well, spin and feel were there. Also tried MX-P, and it seemed a little too dense for this softish blade, I struggled to engage the blade to perform speedy loops with maximum power, also medium power loops tend to go longer than needed to land reliably. Beware. |
Posted By: Knuckle Ball
Date Posted: 03/14/2020 at 6:47am
|
I have been using Joola Rossi Emotion as my main blade nearly 4 years now. Tenergy 05 on both sides is simply amazing for me. This is particularly true if I am on the offensive. Banana flicks, drives, counters, active blocks, spinny loops and side spins. My only trouble with this rubber is receiving spinny serves as T05 is most sensitive to incoming spin. If you read it wrong, then you're burned. I solved this with Dignics 05 on my backhand. Much firmer than 05, and less reactive to incoming spin. Blocks are awesome, my flicks and backhand are just as spinny. In fact I am tempted to use Dignics both sides. Hope this helps. ------------- Blade: Rosewood NCT V FH: Dignics 05 Black BH: Moristo SP Red |
Posted By: jackass22
Date Posted: 03/14/2020 at 9:23am
|
Thank you. I am afraid of the hardness of dingnics for bh. I play very spiny slow topspin to backspin of my opponent and than drives, blocks very close to table. What thickness do you use?
|
Posted By: darkmoor
Date Posted: 03/14/2020 at 11:36am
|
I can tell you Dignics will work just fine. It does not feel hard at all, especially on a blade like JRE. Remember, there is a hard koto right below a relatively soft but still thin hinoki ply. I can also confirm again that softer rubbers work great with this one, too. Hinoki-koto combination of first two plies seem to really work for these.
|
Posted By: jackass22
Date Posted: 03/14/2020 at 4:37pm
|
Dont you have problem to open strong backspin with dignics on bh? I prefer softer rubber for openining strong backspin(joola rhyzm tech). Because i am taller , i am affraid that i dont have enough speed of wrist and enough bending of knees for play opening loops to backspin . ? |
Posted By: darkmoor
Date Posted: 03/14/2020 at 5:40pm
|
No offence, but you seem to so 'afraid' of various things that it begins to sound rather strange. Besides, there are no rubbers to adapt to you, there's you who needs to adapt to how they play. Being tall, for example, is hardly and excuse for not staying low enough to hit the ball with a proper technique. Apart from that, Dignics grabs the ball extremely well, which makes it rather easy to flip that backspin over the net.
|