What is a good TT table?

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

ITTF has the following regulations for a TT table:

		ITTF 
		Handbook 2009 
		/ 2010

      Index
      Description

      2.01 
      THE TABLE 

      2.01.01 
      The upper surface of the table,
 known as the playing surface, shall be rectangular, 2.74m long and 
1.525m wide, and shall lie in a horizontal plane 76cm above the floor. 

      2.01.02 
      The playing surface shall not 
include the vertical sides of the tabletop. 

      2.01.03 
      The playing surface may be of 
any material and shall yield a uniform bounce of about 23cm when a 
standard ball is dropped on to it from a height of 30cm. 

      2.01.04 
      The playing surface shall be 
uniformly dark coloured and matt, but with a white side line, 2cm wide, 
along each 2.74m edge and a white end line, 2cm wide, along each 1.525m 
edge. 

      2.01.05 
      The playing surface shall be 
divided into 2 equal courts by a vertical net running parallel with the 
end lines, and shall be continuous over the whole area of each court.  

      2.01.06 
      For doubles, each court shall 
be divided into 2 equal half-courts by a white centre line, 3mm wide, 
running parallel with the side lines; the centre line shall be regarded 
as part of each right half-court. 
I have been playing TT for a few years but I now realize that I know so little about the table.  You can have 2 tables with the same bounce of the ball (23cm) when the ball is dropped from a height of 30cm, but these tables can have different properties.
e.g. different reaction to spin; difference in "bounciness" when the ball is hit with different amount of force.
I know I have played on a table that I like a lot although I cannot pinpoint exactly what I like about it.
WHAT EXACTLY IS A GOOD TABLE?
There must be something more than that 23cm/30cm rule.
This has probably been discussed but can someone help explain?  Thanks.