Butterfly Taksim Penhold blade
Printed From: Alex Table Tennis - MyTableTennis.NET
Category: Equipment
Forum Name: Equipment
Forum Description: Share your experience and discussions about table tennis equipments.
Moderator: haggisv
Assistant Moderators: position available
URL: http://mytabletennis.net/forum/forum_posts.asp?TID=10438
Printed Date: 05/02/2024 at 1:04am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: Butterfly Taksim Penhold blade
Posted By: dragoncat
Subject: Butterfly Taksim Penhold blade
Date Posted: 03/28/2007 at 4:31am
|
Hi all. My friend is thinking about buying this blade as I have never used it so can't give my friend opinions. Has anyone used this? And can you tell me how is your experience with this bat (A small review would be perfect)? Thanks. |
Replies:
Posted By: Wawaicetea123
Date Posted: 03/28/2007 at 9:26am
|
i own it
its a nice blade from what i remember
mine is in bad condition and was my first pro cpen blade
it has great control but the speed rateing is slower than what they say
over all i would say its a great blade
butterfly rateings i would say it is 7.8 speed and 8.8 control
------------- Kreanga Aeros ST FH: Tenergy 05 Red 2.1 BH: Flarestorm II Black 2.1 |
Posted By: a11291994
Date Posted: 03/28/2007 at 5:49pm
| this blade has carbon just letting you know. so i hits hard. Not like power hard but offense type of hard. Its ok i guess. |
Posted By: aeoliah
Date Posted: 03/28/2007 at 8:53pm
|
I had it once, it is arylate carbon. I like it but mine was too heavy for me (over 90 grams) so I sold it. I considered the speed to be quite ok.
------------- Member of the Single Ply Hinoki Club Viscaria Super ALC C-Pen Rasanter C48 |
Posted By: dragoncat
Date Posted: 03/29/2007 at 5:22am
| Guess there's nothing special about this blade, especially now the size of the ball has changed to 40mm. Might suggest my friend to buy 'Primorac Carbon-CS', it is cheaper and much faster. Think the less control can be enhanced by rubber with better control. |
Posted By: AMonteiro
Date Posted: 03/29/2007 at 7:43am
|
it seams to be a little ticker viscaria..
------------- Dynaryz AGR /Yasaka Goiabao 5 / Dynaryz AGR |
Posted By: Wawaicetea123
Date Posted: 03/29/2007 at 9:37am
i never said it was slow i said it is slower than they say and its way over priced if your looking for a faster blade buy the primoric carbon cs its 40 dollers cheaper aswell ------------- Kreanga Aeros ST FH: Tenergy 05 Red 2.1 BH: Flarestorm II Black 2.1 |
a11291994 wrote:Posted By: Wawaicetea123
Date Posted: 03/29/2007 at 9:37am
yea and also if oyu wnat infor or wnatto buy it i have one =] ------------- Kreanga Aeros ST FH: Tenergy 05 Red 2.1 BH: Flarestorm II Black 2.1 |
Posted By: dragoncat
Date Posted: 03/29/2007 at 10:09am
Hi wawaicetea123. Can you give me a bit more info. Like - how long have you been using it? - your price. - any pictures of it? Thanks. |
Posted By: Wawaicetea123
Date Posted: 03/29/2007 at 4:08pm
|
yea i have pictures i just took acouple days ago im willing to sell it out for 65 thers really nothing wrong with it great condition one minor ding with the finger wells started to be carved in never got to completly finish
its about 4 months old its really fast not enough feel for me since i like to loop worth a try i will put up pictures if your willing to buy
------------- Kreanga Aeros ST FH: Tenergy 05 Red 2.1 BH: Flarestorm II Black 2.1 |
Posted By: 7homuz
Date Posted: 03/29/2007 at 6:14pm
|
offtopic.. but sriver doesn't come in 2.5 wawaicetea xD heehee you mean max rite? :)
------------- Blade:Darker 7P-2A Forehand: Donic Bluefire M2 MAX Backhand: Palio CK531A 0.6 |
Posted By: jasonz
Date Posted: 03/29/2007 at 7:19pm
|
I have a takism, I think it is just okay. I am not that impressed by it. I think primorac carbon or avalox 700 or stiga 7.6 are better choices.
------------- Jason Z Stiga Xu Xin Dynasty FH DHS TG -60 Soft BH DHS H3 white sponge pro |
Posted By: 7homuz
Date Posted: 03/29/2007 at 9:14pm
|
i've tried taksim, i didn't really think much of it. lots of better choices for penhold out there, off the top of my head, my fav cpen blades were Darker 7p-2a, clipper cr, and yasaka extra. i know that yasaka gatien carbon is pretty good too. taksim was much too soft to block with imho, and too bouncy for shortgame even with h3.
------------- Blade:Darker 7P-2A Forehand: Donic Bluefire M2 MAX Backhand: Palio CK531A 0.6 |
Posted By: aeoliah
Date Posted: 03/29/2007 at 11:33pm
Sorry 7homuz, I might have asked this question previously, but I missed the reply: according to your opinion, which one is faster between Taksim and Darker 7P-2A? I found that my Taksim is faster than my 7P2A-Carbon. Or was it because I sealed too much on my Taksim ? ------------- Member of the Single Ply Hinoki Club Viscaria Super ALC C-Pen Rasanter C48 |
Posted By: 7homuz
Date Posted: 03/29/2007 at 11:55pm
|
i thought that the 7p-2a was faster for flat shots like blocks and hits, but taksim was slightly faster on loops. it was alittle easeir to loop with taksim too.
------------- Blade:Darker 7P-2A Forehand: Donic Bluefire M2 MAX Backhand: Palio CK531A 0.6 |
Posted By: Wawaicetea123
Date Posted: 03/30/2007 at 5:52pm
yea max is 2.5 i just like saying 2.5 couse it sounders bigger ------------- Kreanga Aeros ST FH: Tenergy 05 Red 2.1 BH: Flarestorm II Black 2.1 |
Posted By: 7homuz
Date Posted: 03/31/2007 at 1:22am
|
no, max is not 2.5. max is whatever the max thickness of the sponge could be when added with the topsheet equals 4mm. for example, if the topsheet is 1.5mm thick, then max sponge will be 2.5. in the case of sriver, the topsheet is around 1.7mm, MAX is only around 2.3.
------------- Blade:Darker 7P-2A Forehand: Donic Bluefire M2 MAX Backhand: Palio CK531A 0.6 |
Posted By: shij421
Date Posted: 03/31/2007 at 1:28am
that is new information to me. Thanks thomuz ------------- Violin FL Tenergy 05 2.1 Black Tenergy 05 FX 2.1 Red |
Posted By: aeoliah
Date Posted: 03/31/2007 at 5:03am
|
7homuz, I just noted that the two carbon plies on 7P2A Carbon are positioned near the center. Perhaps this is why the blade is not very fast because they are far from the outer plies. Other carbon blades that I know has the two carbon layers towards the outer side.
------------- Member of the Single Ply Hinoki Club Viscaria Super ALC C-Pen Rasanter C48 |
Posted By: 7homuz
Date Posted: 03/31/2007 at 3:51pm
|
i personally thought that the 7p-2a wasn't a good deal compared to the normal 7p-2a. i tried one (shakehand) and didn't it anymore then the normal 7p-2a, in fact i liked the normal one abit more since it was lighter.
------------- Blade:Darker 7P-2A Forehand: Donic Bluefire M2 MAX Backhand: Palio CK531A 0.6 |
Posted By: aeoliah
Date Posted: 03/31/2007 at 9:48pm
|
Thanks for your information. This will be a lesson for me. Based on the comments on the normal 7P2A I bought 7P2A Carbon thinking that I would get a faster blade, and now it seems that I am wrong.
------------- Member of the Single Ply Hinoki Club Viscaria Super ALC C-Pen Rasanter C48 |