Need your input for hinoki blades
Printed From: Alex Table Tennis - MyTableTennis.NET
Category: Equipment
Forum Name: Equipment
Forum Description: Share your experience and discussions about table tennis equipments.
Moderator: haggisv
Assistant Moderators: position available
URL: http://mytabletennis.net/forum/forum_posts.asp?TID=14911
Printed Date: 04/27/2024 at 4:56am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: Need your input for hinoki blades
Posted By: ryno
Subject: Need your input for hinoki blades
Date Posted: 11/30/2007 at 9:23pm
|
Ok i have a big piece of musical grade port orford cedar which is identical to japanese hinoki in fact most of your "hinoki" is POC.I have a piece big enough for 10 blades.just this piece cost $325.it is better than the last stuff i used.The last POC i used was kiln dried this is air dried.I plan on making 4 j pens and 6 shake hand blades.Wht thickness do you think i should go with for the shake hand blades as well as the j pens. i also have a good scale now so i will have acurate weights now.any suggestions on head shape/size or handle size or style would be helpful. i don't play shakehand so i need some input.The last blades i made were j pens patterned after the CPL but i will use the more compact kokutaku shape this time to decrease weight but increase the speed. ------------- Red Label Kim Taek Soo (83g) Almana Sound Synergy Tech (max) |
Replies:
Posted By: ryno
Date Posted: 11/30/2007 at 9:27pm
just incase you forgot this is what i made last time. i also have a lot better cork as well ------------- Red Label Kim Taek Soo (83g) Almana Sound Synergy Tech (max) |
Posted By: Wawaicetea123
Date Posted: 11/30/2007 at 9:29pm
|
could you make a thin cpen on reqeust? like 162x150 and like 5.0mm thick. that would make a great gift formyself. what do you say? ------------- Kreanga Aeros ST FH: Tenergy 05 Red 2.1 BH: Flarestorm II Black 2.1 |
Posted By: ryno
Date Posted: 11/30/2007 at 9:43pm
|
i can make a cpen but i think 5 mm is too thin most single plate blades are at least 8mm.but i can make anything ------------- Red Label Kim Taek Soo (83g) Almana Sound Synergy Tech (max) |
Posted By: everest81
Date Posted: 11/30/2007 at 10:20pm
|
how much do u plan to sell them for ?
------------- Member of Single ply Hinoki club Kokutaku Cho-Super Cho Tokusen + Tenergy Max Collecting dust: Nittaku Cho tokusen 9mm, kokutaku cho tokusen 9mm, darker 90 10mm, ryno custom poc blade 10.2mm |
Posted By: ryno
Date Posted: 11/30/2007 at 10:42pm
|
i am thinking $59 which will include shipping ------------- Red Label Kim Taek Soo (83g) Almana Sound Synergy Tech (max) |
Posted By: everest81
Date Posted: 11/30/2007 at 11:20pm
Can you make one Jpen for me, just the way u have mentioned, like kokutaku blades, smaller head but lighter, but 10mm. ------------- Member of Single ply Hinoki club Kokutaku Cho-Super Cho Tokusen + Tenergy Max Collecting dust: Nittaku Cho tokusen 9mm, kokutaku cho tokusen 9mm, darker 90 10mm, ryno custom poc blade 10.2mm |
ryno wrote:Posted By: kim_taek_soo
Date Posted: 12/01/2007 at 2:27am
|
My buddy had a custom made 6mm 1ply hinoki cpen that he accidentaly broke by removing his rubber!
Don't make 1plies thinner than 8-9mm! For your own good! ------------- BTY Neutrino R Nittaku Moristo SP 2.0 My feedback: https://mytabletennis.net/forum/topic92859.html |
Posted By: Wawaicetea123
Date Posted: 12/01/2007 at 1:36pm
|
i would go for 7.0mm but anything more is way to thick for me ------------- Kreanga Aeros ST FH: Tenergy 05 Red 2.1 BH: Flarestorm II Black 2.1 |
Posted By: aeoliah
Date Posted: 12/01/2007 at 9:57pm
It is better to buy at least 9 mm. If you want to take a risk, you can go for 8,5 mm (but there have been two cases where the blades developed crack by themselves). Thinner than 8,5 is not recommendable at all. ------------- Member of the Single Ply Hinoki Club Viscaria Super ALC C-Pen Rasanter C48 |
Posted By: alfie
Date Posted: 12/01/2007 at 10:06pm
I don't know anything about single ply but I do know they need to be 9mm thick as thinner than 8mm and they will split ------------- Blade Xiom Control 3/ALL+ BH Andro impuls speed FH H3 Provincial Tibhar CTE |
Posted By: tiehwen
Date Posted: 12/01/2007 at 11:04pm
They (Nittaku's SCIENTIST?  ) must have done some kinda R & D to come up wif this thickness or it sounds better, 8.8mm, to lure the Chinese jpen holders out there to take a look @ this AIRULINE. It's not bad, quite cheap I must say n u can actually put rbr on BH for RPB play!------------- http://mytabletennis.net/Forum/forum_posts.asp?TID=17089" rel="nofollow - I love & am inspired by Malala Yousufzai's "True & Tough" LIFE STORY |
Posted By: ryno
Date Posted: 12/03/2007 at 1:58pm
|
Just got my wood in .I should have blades made by this weekend.If you want one just pm me and i will send you a paypal invoice. I will make the style and thickness you want .Standard is going to be 9.5mm j pen and 8.5 mm shakehand and 8 mm cpen.They are $59 which includes shipping in u.s..If you want something other than that pm me and i will make it . ------------- Red Label Kim Taek Soo (83g) Almana Sound Synergy Tech (max) |
Posted By: stephen chung
Date Posted: 12/06/2007 at 7:37am
|
ryno, Can you do a 10mm cpl 95-100g for me? ------------- Blade: Butterfly Custom made 1ply Hinoki 10mm Rubber: Bryce Hard |
Posted By: ryno
Date Posted: 12/06/2007 at 8:21am
|
yes i have a CPL pattern the weight will be somewhere around what you want ------------- Red Label Kim Taek Soo (83g) Almana Sound Synergy Tech (max) |