The rubber for jun mizutani blade
Printed From: Alex Table Tennis - MyTableTennis.NET
Category: Equipment
Forum Name: Equipment
Forum Description: Share your experience and discussions about table tennis equipments.
Moderator: haggisv
Assistant Moderators: position available
URL: http://mytabletennis.net/forum/forum_posts.asp?TID=28443
Printed Date: 05/05/2024 at 8:29am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: The rubber for jun mizutani blade
Posted By: ejmaster
Subject: The rubber for jun mizutani blade
Date Posted: 08/27/2009 at 10:25am
|
after watching korea open i decided as an ej, to give my jun mizutani blade another chance.
i have tried jun mizutani blade with a lot of fh rubbers (t05, chinese, ...), bh rubber sriver fx, and never liked it
however, 2 days ago i tried with bryce on fh and, .... this is THE RUBBER for Jun Mizutani blade.
And now is one of my favourite blade + rubber combo.
Sometimes it gets a lot of time and the right rubber to get a monster blade.
|
Replies:
Posted By: tpgh2k
Date Posted: 08/27/2009 at 10:32am
|
t05 works very well. t64 is a bit different but i prefer t05. try boost series. how did u like chinese rubbers on it? ------------- www.youtube.com/gsutabletennis Timo Boll Spirit FL H3 Blue Sponge Black FH Tenergy 64 Red BH |
Posted By: ThaiLe
Date Posted: 08/27/2009 at 10:51am
|
Try Donic Coppa Gold. It worked really well on MJ blade. |
Posted By: ejmaster
Date Posted: 08/27/2009 at 10:55am
|
t05 works well, but give bryce sometime.
one important tip with this blade is to get the hand holding the blade going to hold more the rubber. see in videos that jun mizutani does it.
i rather like viscaria, or tbs, more with bw2, or h3 or 729 tensor ..... than jun mizutani.
good work mizutni.
|
Posted By: ejmaster
Date Posted: 08/27/2009 at 11:10am
|
i play with a 1,9 bryce.
jmizutani blade with that rubber is also very dangerous serving. the combination of blade hardness and that rubber can do amazing serves.
watch also how mizutani hurts shuai with the serve.
|
Posted By: LittleFish.Net
Date Posted: 08/27/2009 at 11:13am
|
It needs a pretty fast stroke motion to play right with hard sponge rubber on a hard blade. After playing with T05 on a Ma Lin carbon on and off for 9 months I'm giving up; it is just too tiring for me. I've heard that the Jun Mizutani is a hard blade too so your selection of Bryce should fit very well. I'm glad you've found a combination that you really like. I'm getting closer for my own quest with the Violin I assembled last week. ------------- Violin CPen/FH:T05 2.1/BH:T64 1.9 W-6 CPen/FH:IQUL 2.2/BH:IQUL SV 2.0 |
Posted By: peter79
Date Posted: 08/27/2009 at 11:19am
|
I found Sriver Fx very good on FH and BH for Controlled loop on both wings.
------------- Andro Wanokiwami AO Offensive 83 gr H3 National Orange 40 deg 2.2 Baracuda Max 182 Gr |
Posted By: unagidon
Date Posted: 08/27/2009 at 1:22pm
|
sriver g3 fx...maybe ------------- kong linghui special: bluefire jp01 / rakza x http://mytabletennis.net/forum/forum_posts.asp?TID=37939&title=feedback-unagidon" rel="nofollow - my feedback |
Posted By: ejmaster
Date Posted: 08/27/2009 at 9:44pm
|
woow unagidon
xiom strato, that is really a weapon. need skill to handle it. well another advantage of that miztani bryce blade is that is a good evolution blade. I mean that blade is not forgiving, so the more you train with that blade themore easier improvment you are going to have with more forgiving blades. After training with jm, i get my HK from 2005 (sorry that is the really good HK, 07, 08 not as good) with bryce and i can play like god. another tip: if you want to improve take a spare blade with somewhat similar setup but handicaped in someway (weight, forgivness,...) and train with that. jm blade is for people skilled and that trains every week. if not, then use it to improve with easier setup.
|
Posted By: chris.b40
Date Posted: 08/28/2009 at 11:42am
|
what is the best rubber for hk ------------- AVALOX BLUE THUNDER |
Posted By: ejmaster
Date Posted: 08/29/2009 at 6:25pm
|
i play 2 HK 05 one with bryce fh and another one with yasaka new era (a thin 2.0 one) fh and sriver fx bh. these are the 2 best rubbers for me.
i didnt like t05, h3 (maybe a faster one can be good), sriver (i liked but slow, maybe a faster one g2,3 can be good).
i will try bw2 soon, can be interesting.
|
Posted By: angel415
Date Posted: 10/20/2010 at 7:04pm
| did you just tried the normal bryce or like fx, speed, hard??? and for you using for the bh on the jun mizutani? |
Posted By: stiltt
Date Posted: 10/20/2010 at 7:35pm
|
I had a good time playing the MJ with Cornilleau Pilot Advance rubbers. I hear here and there that Cornilleau Pilot Advance are very similar to Stiga Boost rubbers. It's true they do have a lot in common. I bet the boost tx rubbers would work great on this blade (I never tried). ------------- /forum/topic91512_page1.html#1124698" rel="nofollow - sales - forum_posts.asp?TID=19315" rel="nofollow - feedback |
Posted By: Carryboy
Date Posted: 10/21/2010 at 1:21pm
|
Boost TS, Joola Mambo GP, Cornilleau and T05-FX. OH Stiga Calibra series is not bad but would not be my first choice. ------------- Spin Master Carbo Power (Stefan Elsner Custom) Donic Acuda S1 Max Donic Acuda P1 Blue Max |
Posted By: chris.b40
Date Posted: 10/21/2010 at 1:36pm
|
The Jun blade is a very quick blade and the H3 national would suite this blade just fine ------------- AVALOX BLUE THUNDER |
Posted By: tsanyc
Date Posted: 10/21/2010 at 2:37pm
|
Try T05 FX, it should work well with MJ blade. ------------- http://mytabletennis.net/forum/forum_posts.asp?TID=27730&title=feedback-tsanyc - My Feedback 
|
Posted By: xander7803
Date Posted: 09/07/2011 at 10:52pm
| T05 fx works phenomenal on the bh. Still looking for a good fh rubber. For now h3 provincial tuned works fine but i noticed that counterlooping hurts a bit for some reason. I will try the new BW2 red sponge next. I heard counterlooping is great with that rubber |
Posted By: GwaiLo
Date Posted: 09/07/2011 at 11:06pm
Isn't the Photino really similar to the Mizutani? I think the TO5 works best with my hinoki outer ply. Thats just what I think. ------------- Blade: Butterfly Photino FH: Tenergy 05 BH: Tenergy 64 |
Posted By: peter79
Date Posted: 09/08/2011 at 12:04am
|
I stick roundell on BH, it's pretty good. FH I put H3 Neo Provincial 39 deg. I don't use it as my primary blade, it's a blade for my wife if she wants to play with me ------------- Andro Wanokiwami AO Offensive 83 gr H3 National Orange 40 deg 2.2 Baracuda Max 182 Gr |
Posted By: SmackDAT
Date Posted: 02/10/2012 at 5:09pm
|
Do chinese rubbers work well with chinese rubbers such as Skyline TG3 NEO or H3 NEO? Would it be too hard? ------------- Zhang Jike ALC AN (88g) Tenergy 05 Hard (2.1, B) Tenergy 19 (2.1, R) https://goo.gl/bFWoxW" rel="nofollow - https://goo.gl/bFWoxW |
Posted By: mikepong
Date Posted: 02/11/2012 at 3:55am
|
i use T05 both on FH and BH on my MJ, and i like it, i have not tried chinese rubbers on them ------------- Viscaria FH: Tenergy 05 black BH: Tenergy 05 red |
Posted By: end-er
Date Posted: 02/11/2012 at 4:30am
|
Has anyone played with T05FX and T64 on this blade? I will be tempted to get T64 after my current rubbers. ------------- Jun Mizutani Tenergy 05 FX |
Posted By: jatienza930
Date Posted: 02/16/2012 at 12:30am
|
I'm using the addidas p5 and tenergy 05 fx as the mizutani is a heavy blade and this combination keeps the blade relatively light. I tried to use the 05/05 fx combo but its just too heavy and since the p5 behaves similarly to the 05 i switched and so far works well ^_^
------------- BTY TBS FL T05 T64 My Feedback http://mytabletennis.net/forum/forum_posts.asp?TID=56638&KW=jen&title=jatienza930-buy-sell-feedback |
Posted By: guruzz
Date Posted: 02/16/2012 at 2:55am
| I used baracuda and S2 but the best is baracuda and tgy64.. |
Posted By: inguhrushuh
Date Posted: 04/12/2012 at 8:48pm
| has anyone tried it with skyline 2 neo yet? I haven't had the money yet to try it out so I'm just throwing ideas out. |
Posted By: mon22
Date Posted: 04/13/2017 at 2:08am
|
Boop on Chinese rubbers ------------- I am a total Newb. Come at me! |