I think table tennis business seriously relies on how many friends you have. And now I decided to come here more often, and to share more about how I run my brand Nexy.

 

Currently, I'm not very good at English, and also not free enough to reply all the questions, but I will try as much as I can to share what I am doing with the people here.

 

So, this article can not be done in one day, and I will keep on writing day by day until I can complete the whole story of one blade; Nexy's SPEAR.

 

 

 

1. What's the goal of SPEAR

 

Table tennis has been my number one job for many decades.

I started it when I was 10 from my father, and I really liked it.

But my father did not enjoy much playing with little son, because it took money and time.

At that time, my house was not rich enough to support my curiosity, and I could not keep on attending piano lesson, and probably my father could not be able to take me to table tennis gym often.

 

But he was really good player, and I could learn some basic skills from my father.

 

It took more than 10 years for me to become better player than my father since that time.

He promised to buy one bicycle for me, and I wanted it badly, but could not win any game until I become a university student.

 

Any way, I became a student, and I joined table tennis club there.

And there I had to change all things, because all the basic skills was not right.

It was not easy process, but I went through it.

I once tried to become a defensive player, and I could get chances to test many kinds of blades and rubbers.

 

Probably, this story will not be interesting for you. But I just want to say that those blades are not short term work.

 

Conclusionally, even though I'm not a professional player, nor a professional carpenter or something, but I can safely say that I've been crazy about table tennis for very long time.

 

In 2005, when I started to run table tennis business, I found out that some day I will run my own brand.

I was quite sure it's not only about money and tradition.

Once I'm sure I can satisfy with what I make, then I can satisfy many others, and that will lead my brand successful, that was what I could be sure at that moment.

 

And I started to learn many blades' structure and fuction.

It was not very hard, because I really liked it.

 

So, all the blades made in Nexy are meant to satisfy me.

I don't care about category.

5-pl, 7-ply, carbon, arylate carbon....new products in each year...

...that's very far from the way I run this business.

 

Once I start, I never stop before I'm satisfied.

So, most of the blades are alike in some ways.

 

Fast, Spinny, well balanced, good feeling.

Maybe it sounds very cliche, but surely these are the puropose for my blades.

 

Seemingly (more over meaninglessly) too much ideal is what I'm struggling to get with my blades.

And I don't think that's not possible to achieve.

 

Of course there is a general course I experience whenever I produce blades.

I really liked it, but after 6 months, I found out better one will be possible.

And the best blade becomes less perfect, and it gives its way to the next new blade.

But at any cost, I release a blade when I really like it at that moment.

 

 

Therefore, the purpose of the up-coming new blade SPEAR is very the same as other Nexy blades.

 

Fast, Spinny, well balanced, good feeling

 

 

 

 

2. Basic Idea about SPEAR

 

If you look at my before blades, you will know that I've been recently focusing on SPRUCE, which lies under the surface wood.

I used spruce for Dexter ( http://nexy.com/shop/step1.php?number=580 - http://nexy.com/shop/step1.php?number=580  )

and Color ( http://nexy.com/shop/step1.php?number=582 - http://nexy.com/shop/step1.php?number=582  )

 

This wood is very attractive. With this wood, you can create better speed without losing wooden feeling to carbon layer.

And this spruce ply makes big sound and good feeling when you hit the ball.

 

But when this ply comes too much close to the rubber, than the sound and feelings are too much powerful, and the ball will not be spinny much.

 

So, this material needs to come in the right place, which means that I need to find the ideal thickness for the surface wood.

 

It's not possible to decide exact thickness for all the surface materials.

I kept on testing....and I found out Japanese Hinoki needs to be thicker than Limba or Koto, when I want to hamonize this with Spruce.

 

Any ways, the first idea has come from this spruce wood.

 

Actually, I finished all the studies related with this material, from my experiences of Hurricane King, Offensive classic, Ebenholz and several other blades.

 

But then again, I thought why all those blades are not similiar to Stiga's clipper CR or Butterfly's Korbel or SK7?

I think most other designers were facinated too much by this sprus material's lightness and speed.

So, they might not be interested in producing a blade deep and soft. Probably they thought they need to make the blades light and fast.

 

So, there I started to think about this blade SPEAR.

 

When you use a SPEAR, the blade of SPEAR should go through a target, to harm.

Likewise, when I name thie blade as SPEAR, I thought that....when you play with this blade SPEAR, you need to be able to feel that the ball goes through your blade, just like a spear goes through a target.

I mean you need to feel that your blade hugs the ball so deep into it, that you think the ball becomes a spear into a target.

 

I thought it's possible.

Because all this deep and soft feeling can not be too much, when I harmnize this with SPRUCE's lightness and speedy character.

There maybe I can get an ideal fuction.

 

Ok, that was the basic idea I started from.

 

 

I will write more tomorrow.

 

Just keep on waiting before I finish this story.

I hope you can enjoy my writings.

 

 

 

 

Actually, Color was also designed to attain the same goal as I did for SPEAR.

But if I compare those two blades, when a blade has a Japanese Hinoki on the surface, it has to be more expensive, and also the feeling is quite different.

 

Normally, Hinoki feels that it makes the ball stick to it, when you make a spin. So the feeling is like when you cut something in the air with fast chopping.

 

But Limba material feels to embrace the ball deep.

I absorbs the ball into itself.

I tried to maxmise that feeling with SPEAR.

 

So, conclusionally, both of them are aiming for the maximum spin but the way of making big spin will be different.

Normally, Hinoki surface is good when your swing speed is very fast and short, but Limba is the opposite...generally.

 

(This is only persnal feeling, and I think there could be some other opinion on this topic.)

 

I really want to go through all the details...

 

Just wait a little.

I will manage some time more, my friends....

 

I will keep writing more about SPEAR.

 

 

3. Composition.

 

 I found out some people are trying to guess out the whole materials of my blades. I can safely open all the materials for some blades, but for some other blades, I don't want to tell.

For examples, I use some specific wood for Oscar and Hannibal's center wood. And this wood makes my blades different from other similiar blades.

 

If you tested, then you would agree that my Hannibal and Oscar are not very dull at all, even though they have artificial materials.

So, I heard that many people are saying that my Hannibal and Oscar feels very natural, and have good feelings, without metal touch.

 

I think the main reason lies on that center wood.

Any ways, I don't want to reveal that wood.

 

By the way, regarding my next product SPEAR, the composition is very simple.

It's as below.

 

Limba - sprus - ayous - sprus - Limba

 

This is very the same structure with other several kinds of classical blades. 

But that's not all.

 

I have known that this composition creates really good blade.

But as I told you in the before writing, the material SPRUS is very very important factor to decide the whole character of a blade.

And I could not be satisfied with all other similiar kinds.

There must be some more to this composition.

 

So, that was to make use of Sprus' speed jointed with thick center layer of Ayous and thin Limba.

 

Here is the principle.

 

Regarding Ayous, this material is very soft in the first touch, but deep inside, very hard and resilient. 

But this material is not easy to be well harmonised with other materials.

When this ayous is thin, I found out some times it does not affect on the blade enough, so you don't feel the difference.

And I was sure that I need to make the Ayous thicker than other blades, by which I can make people feel soft and even damp on the moment the ball goes into, but in the end they need to find tru power and resilience deep inside the blade.

 

So, that's how I use this Ayous with my blade COLOR and now with SPEAR.

 

Regarding Limba, I found out when I make the limba ply thick, as I did with my Hinoki ply, then the feeling will be too much soft, and I can not utilize the true good factor of sprus material. Sprus needs to affect on the ball in some ways directly, not only through Limba, indirectly.

 

So, I used very thin Limba.

 

After all, Spear is a mixture of very delicate and subtle harmony.

 

Surface - soft and embracing material, Limba...but thin...so the ball is affected also by the second ply, which is fast and hard Sprus.

 

And then, the Sprus is supported by soft and damp, but powerful and resilient material, thick ayous.

 

It was not easy to prove that my belief was really right.

I had to do lots of tests for long times, over and over again.

And I could come closer to what I wanted little by little.

 

There was one more factor I need to consider.

The total thickness of the blade.

If the blade is too thick, then all the good things does not attract much any more.

So, I had to make it not much thick, which influenced all the ply's thickness in each tests.

 

And the final sample is around 6.5mm, which comes between Color and Dexter.

 

 

During this process, I tried several different compositions.

Here is one picture that shows that I tried two sprus plies between Limba and Ayous.

 

 

 

 

 

 

And here is the final version.

As you know, the structure is kinda classic.

But the center layer seems thicker than most other similiar kinds.

And also the thickness of sprus is very key factor in Spear.

 

Limba is thinner than most other Nexy blades' surface, which make the ball goes deep.

 

 

 

The edge looks not nice.

Because I tested the blade after cutting little by little.

The size of the blade is also very much responsible for the feeling.

It's not only about balance, but also about feeling and power.

 

When I cut 1mm, the blade becomes totally different.

I tested the blade by 0.5mm cut for several times.

 

 

Here is the picture of several samples I went through.

 

 

 

Here is the final sample.

 

 

 

I rewrite here.

 

I think my brand NEXY is different from other brands, and you will know it when you keep on watching.

 

And I will prove it by products, not by writing only.

 

Thank you for the concern, and I'm sure your interest will urge me to make better product. 

 

   

I wrote what I wanted to tell you in the upper article.

Thank you.

 

 

4. Why Korea?

 

Recently, new Korean brand XIOM growed big very fast.

And I think Korean market initiated and urged XIOM to become competitive in many ways, which perhaps affected on my brand NEXY, too/

 

 

I don't want to analyze how XIOM could develop that fast, but I can safely say there could be some reasons I can tell you guys.

 

 

Korean players have been using Japanese penholder blades for many decades.

Recenlty, lots of players are not using Japanese penholder blade any more, but even for me, I used to play with that when I was young.

 

When you play with Japanese penholder blade, your main point comes from powerful top spin attack.

Normally, you know that your back hand side will not be easy to make a point, so, you normally try hard to play with your forehand side.

And once you get a chance, you need to exert your full power, because the other player could make a safe return to your deep back hand side, and in that case, it's almost impossible to move back and hit the ball.

So, when you play with Japanses penholder blade, you tend to focus on high power top spin attack.

 

Many people are not aware what is the differance between top Korean players' looping and other normal amatuer players' ones.

I did not know it also.

 

But by the time I started this business, I could make the similiar kind of top spin attack, after long years trainings, of course.

And I could be able to discern what makes the differance.

 

When you make a top-spin drive with your fast movement, and exact impact, the ball meets not only the surface of the rubber, but also the wooden plate of the blade, because the speed of the blade is that much fast.

 

In other words, if your movement of your racket is very fast when the ball meets the racket, then the ball goes deep into the wooden blade surface passing the rubber on it.

 

If you use thin and soft sponge, then you will be able to feel that in each strokes that your ball touches the wooden surface through the rubber every time.

But when the rubber is soft and thin, even the ball touches deep into the surface of the blade, still the returning ball is not very powerful.

 

But when you make a powerful shot with that exact impact with hard and thick sponge, then your opponent can not see the ball.

It flys like a rocket.

If the opponent blocks the ball, still the blade can not stand the impact of that powerful ball, and that vibration goes into the hands and wrist, making them shaking, and not able to return the ball at all.

 

That's what Korean players are doing.

Normally, many European players make that powerful shot from time to time. But Korean players are not allowed to do practice without that powerful impact.

All the Korean players are trained to do that powerful shot through out the whole match.

 

Some times, it's not good, because they can not learn tricky play.

But that has become long year tradition in Korea.

 

 

Any ways, when you are dealing with those top Korean players, all the equipment needs some more specialties.

And I've been really careful about that point.

  

I can add some more factors.

Korean market asks very high standard for all the products in many fields.

And once your have good product, then the whole market reacts very fast to it. But once your products are not perfect, it's not easy to survive at all.

 

----------------------------------------------------------------------------------------

 

 

In conclusion, my blades had to satisfy that powerful shot from Korean professional players. And that helped me to set a right goal for my blades. 

 

 

 

If I add some more,  Korean players, more or less, play all round.

They play some times little bit away from the table like European players, and some times very close to the table like Chinese players.

 

And I have to produce a blade which is good at close to the table, and also little bit away from the table.

 

 

SPEAR has those characters.

 

It's very fast and spinny when you make a powerful shot; so powerful that the ball can touches directly onto the blade surface pushing through the rubber.

 

And it's powerful also away from the table, let alone close to the table.

 

 

In order to satisfy those three points, I studied mixture of different thickness and shapes over many samples.

And now I'm much relieved and happy to find the final answer.

 

 

 

 

XIOM is my rivalry company.

I'm proud of that brand as a Korean, but I compete with them in Korean market. That's very natural in all the market.

But I don't think I'm against XIOM.

 

I know the desinger of XIOM blades, and we meet quite often.

We share many talks and it's very friendly relationship.

In Korea, many shops sell Nexy and Xiom together.

I hope you don't get me in the wrong way.

 

I just referred XIOM, because Korean market's chracter helped me to be competitive with my products, as it did to XIOM.

And it's really amazing, that XIOM grows this big in that short years.

 

 

Thank you for your comment about Nexy team.

I think now I have the most powerful Amateur team in Korea.

Our team is winning many important matches.

 

By the way, just call me when you come close to my city, Bucheon.

I will buy lunch.

 

 

 

I don't take your message in the bad way.

Actually, my English is not enough to run this English site, and I really need help.

I'm sure you will find many clumsy English there.

If you can help me with checking my site, I will really appreciate it.

Haha. You buy me lunch, and might be out of a LOT of Korean Won, even if it is something inexpensive (and tasty) like Kimbap.

 

I didn't know you fielded a team at that event. I saw one other foreigner, but I think I was the only non-Korean playing out of 1000 players. That tourney kinda looked like a TT version of Woodstock with every club grouping together every place open on floor mats eating and hydrating, plus constant announcing of who plays where. Heck, there were over 70 Cho (3 player round robin group) in 4 div. men event alone. Maybe I can manage a subway trip to Sosa station on the 21st (June) if you are not away on business.

 

Maybe you have your sample of the SPEAR. I have a nice reserve of my favored tensioned and allround offensive rubbers from my last shipment form Cole. Maybe you have your bat with Genius as well. I am just a 4 div. chump and won't threaten crushing you, but I look forward to a nice hit around if we can meet up.

 

 

 

Yes, that's a woodstock for Korean amateur players.

But the fact is, we Koreans have that kind of woodstock almost every week around the whole year.

 

Do you know that I held the big tournament last year also?

That was the third time for me, and the title is "tak9.com game, Germany tour"

4 winners could get a chance to visit Germany for 8 days, and there we played many matches with many German clubs.

I sponsored flying tickets, and Tibhar sponsor accumodation.

 

This year, I think we will hold the 4th. in October or November, and I expect more than 1200 players will participate in.

I think you can try again there.

There are mainly 5th. division.

 

By the way, 21th is good for me.

I will stay in the office.

On what time can you come?

I think I can let you test many blades.

Lissom, Spear and also some blades not named yet.

 

 

I look forward to trying out your equipment, meeting you, and having a hit (with a LOT of stuff). I hope I won't be too worn out from playing Sunday, my previous club wants me to come back there and hit. Once I start hitting, it is like eating american chips... Once you start, you don't stop.. until you eat all the bag.

 

Thank you for warm comments.

 

My blade is typical in many ways, and you will find it soon.

Regarding the weight, it's around 88~92g.

 

 

 

 

The Limba and Koto are extremely different.

Limba is soft, and the feeling is to hug the ball it it.

Koto is very hard, and it's like a thin metal plate.

 

So far, general belief has been that soft and embracing character must be engaged with good spin and control.

So, once we can find speedy material for the middle and center layers, then it would be good combination.

 

Therefore hard material was not interested in for long years.

 

Actually, Hinoki, Ayous, Limba, those generally accepted surface materials were all soft.

 

Any ways, KOTO became a big hit material afterwards.

It porved that general beliefe about soft surface was wrong.

Even very hard material can make good spin and control.

 

If you check, these days, lots of blades are using hard material on their surface.

And surprisingly, Long-pimple blades are also using hard material on their sufaces.

It means that big spin does not always needs soft surface.

 

Any ways, if you study more, then it's not that simple.

Surface material can feel very different when they are mixed with different middle and center layers.

So, the final result comes in only when you completed one blade.

 

Actually, for me, I can predict what will be the result before I make in some ways, but it's not easy to explain.

But you can see how I think if you follow my writings.

 

 

 

 

5. The second purpose of NEXY!

 

This factor might make you puzzled.

 

From this blade on, I'm planning to start a donation program.

If you buy one  SPEAR, then you are donating USD 3 for a poor children.

As a father of three children, I feel awfully sorry for those poor kids around the world, and I hope I can enlarge our donating amount of money more with my NEXY blades.

 

But with this program, I'm very much careful about many other things.

There could be some people who will think that now NEXY is bg company, so they are trying to show off. Or maybe some people will think that NEXY's margin is very big enough to spend USD 3.

 

And some people might think that NEXY is trying to make use of small donation to promote it's new blade, and that'sa shallow marketing program.

 

And also there could be some people who are not able to buy expensive blades, and hope to get lower price for good blade, and they will say, I prefer to have 3 dollors cheaper blade than to donate 3 dollors through NEXY.com.

 

I know all these thoughts quite well, and I've got severe "NO" from may others, but I decided to start it at any rate.

I've been helping some poor children on my own, and some by my company money, but with this speciall program, I can accumulate some more money, and I will use that money for more childen.

And that makes me happy now.

 

I wish nobody could accept this idea in the bad way.

I will calculate my sales exactly, and I will use the money as I promised.

 

 

 

 

 

 

 

Thank you for your supporting on both things.

I will keep on running this donationa program as Nexy goes on.

 

Regarding KOTO, it's surely harder than Limba.

If some one feels it soft, probably it' due to the combination together.

 

 

I received a letter saying that SPEAR seems the best one.

But I can not easily agree with that idea.

 

Actually, personaly, I feel more attracted to LISSOM and OSCAR.

And other two similiar structure blades are also very valuable.

 

Ok, let me give short words or three similiar blades.

 

 

DEXTER : the fastest 5-ply blade I have ever known.

               Extremely fast.

               If you prefer to play with 5-Ply to get good control and feeling,

               but you want to have better speed, just like a carbon blade,

               then you need to experience this blade.

 

COLOR : overall fast, but good balance in all things.

              Mild, and soft feeling is in good harmony with fast character.

              In this forum, there are too much explanation,

              and you will like reading them.

              http://www.mytabletennis.net/forum/forum_posts.asp?TID=30446&PN=1 - http://www.mytabletennis.net/forum/forum_posts.asp?TID=30446&PN=1

 

 

SPEAR : Other two blades are using Japanese Hinoki on the suface,

             but this one uses Limba onto it.

             Therefore, the total purpose and chracter is not similiar at all.

             This blade is excatly the other kind.

 

 

           

So, I can not say this is the best one.

But this blade will be easy to understand for normal European or American players, because this blade is using Limba.

 

 

Ok, here I think I have explained all the things I thought when I start to write.

But you might have some more to know.

So, I will keep coming here and write back to the inquiries.

 

By the way, there are some woods I did not test to the bottom, so don't expect me to know all th answers.

But I will answer to the questions I know.

 

Thank you for reading it through.

 

 

 

 

 

 

 

Here you can see the logo of my donation program on the back side.

 

I hope you like the design.

 

 

 

With thanks.....

 

Ok, here goes it.

 

But as I cleared out, the basic structure is simple.

 

Limba, sprus, ayous.

 

But this blade has attained all other similiar kinds has never got before.

You will find it very clearly when you lay your hands on it.

 

 

 

 

 

 

 

 

 

Yes, correct. That's why this blade is unique.

 

With this blade, I went some other way from other blades' path.

 

First, I tried to make use of SPRUS not as light and fast only, but as soft and damp feeling together with two other plies.

 

Secondly, I use very think Limba, still get enough soft and embracing feeling onto it. This is another new challaenge.

 

Thirdly, thick ayous ply works in two different ways.

In one way, it's effective when it hugs the ball deep.

In the other hand, it bounce off the ball with maximum speed.

 

I thought if I add some more thickness onto the center ayous, then the effect will be bigger, but I wanted to have the total thickness less than 6.5mm, so I stopped here.

 

Anyway, I think every one will know what I intended when he plays with it.

 

 

By the way, it's not fragile at all.

I tested that also.

 

 

Thank you, geotjakra....

That's too much compliments for me.

I will do my best to satisfy you with my next blade, but I think you will be also very much attracted by Lissom.

 

I will write more about it soon.

   SPEAR TESTERS WANTED   

 

 

Dear friends,

 

Here I give you a good news.

 

 

 

I will gather 5 testers, who will receive one SPEAR free of charge.

But this time I will pick up 5 persons on my own.

And I want testers to follow below conditions.

 

 

1. If you want to take part in this, then you need to apply to me only by writing here. You can write why you are suitable, or why you want to do it.

There will be no particular form here.

 

 

2. 5 testers will be selected totally on my own decision.

And the decision will be made only after checking how other poeple write or recommend on that person.

I think if someone gets good replies about his application from other members, then I think I can trust him.

As you know, I'm very new here, and I hope I can rely on other people's opinions.

 

 

3. This time, I will not consider any former relation or mails to me. It's too much complicated to pick up the right person, so I will just check this thread and how people react to the application.

 

 

4. The free blade will go to an applicant, only when he orders something in my http://www.nexy.com - www.nexy.com site. I think I will go on this program here, and I don't want to pay test samples and delivery, too. So, every person needs to know that I will send free sample only together with something ordered in my site.

 

 

5. If the tester receives a blade, then he needs to write a decent review, and I will think that the tester agrees that I can make use of that written article for my advertisement puporses, for an example, I can copy and post that content in my web site or in other community sites for referrances for other people.

 

 

 

There is one more good news.

 

Each tester will be given one free rubber made by AIR.

I imported that rubber, and I want to do some test for that rubbers, too.

So, I will send AIR rubbers, and I hope testers can test that rubber, also.

 

But the rubber test does not have to be related with my free blade "SPEAR", and it will be separate test.

 

 

Ok, please, apply for this new challenge.

 

I will be waiting for all the good people to be interested in my new blade, SPEAR.

 

 

 

 

   SPEAR TESTERS WANTED   

 

 

Be careful, all the applications done by writing here before this notification, ot done by mail... all the past data is not valid.

So, please, apply here again.

 

 

Thank you Austin.

Why don't you apply yourself?

 

 

But English is not my mother tongue, and it's not easy to find where I made a mistake even you told me as such.

So, I will just keep things as it is. Once I become intimidated with wrong spelling and wrong grammar, then I would not be enjoying comming here, and that's worse for me than to have wrong English...es... ^ㅠ^

 

-Austin

 

p.s sorry for the misunderstanding i did not mean to give you an unejoyable time on the forum ^_^

Thats what i thought in my head first, lol , i was like is that marijuana. but hey nexy seems like a great brand! but seeing the rules im ot able to order so sorry maybe sometime in the future.

Wise & courteous move. It's also time for others to have a few cracks at these upcoming Nexy blades. Also it's also refreshing to listen/read about some other potential candidates other then few of the same old same old groups.

Chronos, Petermoo & Geonomicknight are just the trio I like to hear from them.

There may be others tho'.

I read some of these reviews and strangely ONLY ONE outta these - Colour aroused my interest so far.

I'm quite content w/what I've right now.

 

Based on your testing, how does the blade perform compared to classic limba-spruce-ayous 5-plies? 

 

Here are the pictures of Nexy shirts.

 

http://nexy.com/shop/step1.php?number=634 - http://nexy.com/shop/step1.php?number=634

 

 

 

 

http://nexy.com/shop/step1.php?number=632 - http://nexy.com/shop/step1.php?number=632

 

 

 

 

 

 

 

 

Thank you for applying here.

 

Just for some information,

 

For you and for other applicants,

 

I'm not trying to get only good players.

I think good blades does not mean only for top players, and I don't think only top players knows the best answer.

 

So, I hope all people, all age range, all playing levels, can compete here for free SPEAR.

And I will follow my heart when I decide.

 

Japanese Hinoki does not eqaul to a good blade.

The reason this wood is expensive is only because it's not easy to get.

But I don't think this wood is the best material.

 

If I use Hinoki into middle of the blades, then the cost will be bigger, definately, but the result is not promising.

For the middle layer, normally I need to coordinate the whole weight, power and speed.

But hinoki is not very good material for those things.

 

There are some Hinoki 5 ply, or 7 ply blades. But those blades are aiming for one ply hinoki blade feeling, with thinner thickness.

If I use Hinoki for middle, or center ply, then the cost will be higher, and the blade can not be powerful. And in that case, the feeling of the ball touch will not be big.

 

As I told in the other writing, Hinoki feels little bit that ball is scratching the blade surface but a little sticky.

Once you like the feeling, then your swing movement will be different from other surface blade. So, that's what I usually trying to get.

Normally, if you play with my other Honoki blades, your swing wll become faster and smaller, little by little.

That's quite natural thing you will go through when you play with well balanced Nexy blades. And that's also my intentional design inside the blade.

That's why I use Hinoki on the surface.

 

So, for all these things, you would know that Hinoki is not much attractive inside the blade.

 

Thank you again for asking that,...

 

 

Thank you fatt.

 

 

By the way, all those previous testers,peter 79, Jim T.... you guys can apply again.

I'm not sure who I will pick yet, and I hope there could be one or two people who could compare SPEAR with COLOR or OSCAR.

 

Ok, nice to meet all your guys back here.

And thank again FATT!

 

So, I hope you can check that.

 

 

C-pen player is also intersting.

What kind of C-pen blade did you like most before?

 

Any chance to have serial nr 1 put on it ?

Just kidding....

Firstly I have to say the blade looks magnificent! (Edit: So does the shirts, especially the orange.)
If you would ever set up a Nexy-team to promote it in The Netherlands, id surely want to help on that. Maybe Karabijntje and me can co-operate.

I would like to apply to testing the spear aswell, im a trainer/coach.
I tried out alot of frames/rubbers myself, for myself the blade might not be what im searching for. Why I would like to test it then? Well for the simple fact, I advise the players at my club whats best for them, I dont want to put them in pricey TBS etc right away.

Im also a main team captain of my club, I know when its my technique not reaching full potential, or when the blade/rubbers is working against me.

I would love to review this blade and will put all the pro's and con's in a list, then review it vs some other blades I used. I used a wide variety like previously mentioned. Going from All- up to Off+.

Im looking forward to ur reply, whether its positive or not, im impressed :)

Yours Sincerely,

Johan Thomassen

mailto:[email protected] - [email protected]