|
|
Sell modified Gergely 1990's with iron butterfly |
Post Reply |
Author | |
A_R_G
Beginner Joined: 08/07/2018 Location: Honolulu Status: Offline Points: 12 |
Post Options
Thanks(0)
Posted: 08/08/2018 at 12:04am |
I decided to sell Butterfly Gergely. I've upgraded the blade.
What's done: 1) The blade Size is aligned with modern standards 158-151. 2) The blade is lightweight, cutting a cavity in the handle and in the blade. 3) On the Right: a layer of Hinoki is ground, approximately 0.4 mm and 2 layers of hard veneer 0.2 mm thick are glued cross on the cross. 4) On the Left: completely ground the Hinoki layer to carbon and glued a layer of balsa 1 mm thick+2 layers of hard veneer 0.2 mm thick cross on the cross. Therefore, the blade was two-faced (it feels good) and the weight balance moved to the head. Unfortunately, I do not have accurate weights, but feels 85-87 grams. Blade is a tool, not an art object... The price is 150$ I write with the help of an interpreter and apologize in advance for incorrect speech. Edited by A_R_G - 08/08/2018 at 8:31pm |
|
Sponsored Links | |
gosm92
Super Member Joined: 11/30/2009 Location: United States Status: Offline Points: 241 |
Post Options
Thanks(0)
|
offer $100
|
|
A_R_G
Beginner Joined: 08/07/2018 Location: Honolulu Status: Offline Points: 12 |
Post Options
Thanks(0)
|
100 dollars offers gosm92 more options ?
|
|
kakapo
Premier Member Joined: 02/24/2013 Location: Mordor Status: Offline Points: 3430 |
Post Options
Thanks(0)
|
This is a nice blade but it has nothing to do with a Gergely, except the lense.
|
|
Def play grey grip 94gr, Venus 2 blue 2,2, Neubauer KO extreme 1,3mm
|
|
A_R_G
Beginner Joined: 08/07/2018 Location: Honolulu Status: Offline Points: 12 |
Post Options
Thanks(0)
|
From gergeli: center layer+2 layers carbon fiber on both sides + 0.4 mm Hinoki on one side + handle
|
|
gosm92
Super Member Joined: 11/30/2009 Location: United States Status: Offline Points: 241 |
Post Options
Thanks(0)
|
sorry, u modified original gergely
|
|
henningf
Super Member Joined: 03/01/2017 Location: Norway Status: Offline Points: 285 |
Post Options
Thanks(0)
|
This is (a heavily) modified gergely. I think you should write that in the topic so that people doesn’t get fooled
|
|
A_R_G
Beginner Joined: 08/07/2018 Location: Honolulu Status: Offline Points: 12 |
Post Options
Thanks(0)
|
Thanks. I fixed it.
|
|
A_R_G
Beginner Joined: 08/07/2018 Location: Honolulu Status: Offline Points: 12 |
Post Options
Thanks(0)
|
The fact that the old Gergel is almost impossible to find in good condition. Gergel has the top layer of Hinoki and it, unfortunately, breaks down, in addition, Gergel has a very uncomfortable size of the blade and if you do not move the handles up then there are problems with the unification of the overlays. I made the blade much more powerful than the original version, light, two-faced and with a normal size.
Edited by A_R_G - 08/08/2018 at 8:36pm |
|
jt99sf
Premier Member Joined: 04/29/2005 Location: San Francisco Status: Offline Points: 4949 |
Post Options
Thanks(0)
|
+100 !!
|
|
Photino/Super Viscaria : H3 (FH)/Dr N pips(BH)
林德成 HardBat:Hock 3-Ply /Dr Evil |
|
A_R_G
Beginner Joined: 08/07/2018 Location: Honolulu Status: Offline Points: 12 |
Post Options
Thanks(0)
|
From Gergeli: center layer+2 layers carbon fiber on both sides + 0.4 mm Hinoki on one side + handle
Ground on the 1 side of 0.4 mm Hinoki, and on the other 0.7 mm Hinoki, i.e. only the upper veneer. Everything else-GERGELY
|
|
Locvoh1
Super Member Joined: 02/07/2017 Location: USA Status: Offline Points: 471 |
Post Options
Thanks(0)
|
the nice fish-scaled top ply wood looks like koto. ( same as TBS or Viscaria), but the composite layer is not ALC. it looks just like T5000. very interesting. some kind of custom made blade and then handle was replaced with that of a Gergely. I just can"t think of any Butterfly blade was built as such ( a combination of carbon and harder top ply wood). My guess is, it is a heavy (has to be over 90grams), but incredibly fast blade.
Edited by Locvoh1 - 08/10/2018 at 1:32am |
|
A_R_G
Beginner Joined: 08/07/2018 Location: Honolulu Status: Offline Points: 12 |
Post Options
Thanks(0)
|
On the left-Coto, Right-veneer, which I used. I don't know the name. I repeat: This is Gergely 1990s with the iron butterfly. I have veneer and I use it because I'm interested. I sell only because after Rutis (5,5 mm) Gergel is too thick for me, for a game the ball can hit the edge several times. That's too much To answer the topic questions and comments like "This is not Gergel" I stop. |
|
A_R_G
Beginner Joined: 08/07/2018 Location: Honolulu Status: Offline Points: 12 |
Post Options
Thanks(0)
|
I Weigh-I will write
|
|
A_R_G
Beginner Joined: 08/07/2018 Location: Honolulu Status: Offline Points: 12 |
Post Options
Thanks(0)
|
Removed from sale
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Forum Home | Go to the Forums | Forum Help | Disclaimer
MyTableTennis.NET is the trading name of Alex Table Tennis Ltd. |