Weight of Rubbers
Printed From: Alex Table Tennis - MyTableTennis.NET
Category: Equipment
Forum Name: Equipment
Forum Description: Share your experience and discussions about table tennis equipments.
Moderator: haggisv
Assistant Moderators: position available
URL: http://mytabletennis.net/forum/forum_posts.asp?TID=8818
Printed Date: 04/27/2024 at 3:23am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com
Topic: Weight of Rubbers
Posted By: SamyBoy
Subject: Weight of Rubbers
Date Posted: 12/07/2006 at 10:57am
|
Hello all, Do anyone has an idea where to find reliable information on the weight of various rubbers (mostly Stiga, Andro & Butterfly)? That seems to me as a "must know" information before to buy anything, and weirdly enough, a quite hard one to find! Cheers |
Replies:
Posted By: takaaki
Date Posted: 12/07/2006 at 11:01am
|
i would like to know that one, too. i'm a bit surprised that the manufacturers and/or dealers don't provide that info, cuz it is important to know. |
Posted By: SamyBoy
Date Posted: 12/07/2006 at 11:12am
|
I personally like the spin-game... so last year i got myself 2 "tackifire special" rubbers (2.1) : Would i have known the weight of these sheets, i could have got myself a hammer for 50$ cheapper...! lol
|
Posted By: powerplay.de
Date Posted: 12/07/2006 at 11:37am
|
example: Bryce 86 with package, cutted to a Stiga optimum blade is 46g bty ~minus 40g Plasma 470 94g with package, cutted to Stiga optimum blade 48g. andro ~minus 46g Stiga is similar to bty Mendo MP 85g with package, cutted 44g these numbers arent accurate because i use a cheap kitchen scale. You have to calculate +-2g. light rubbers like samba, mambo weights are between 36-40g medium soft rubbers like sriverfx, markv gps weights are between 38-44g medium rubbers cutted like markv, sriver, bryce weights are between 42-48g all max sponge and cutted to 15.8 to 15 cm blade. ------------- BT777, Ishlion, U2 Hinoki, Baum Senso, TBS T05 T05 |
Posted By: cole_ely
Date Posted: 12/07/2006 at 12:13pm
|
I have a large post of a ton of chinese rubber weights back in the archives somewhere.
I'm assuming the numbers listed above are cut weights. A very light cut sheet will be 40-42g (the lightest I've seen was 38). Average is around 44-48. Traditional chinese around 55. Of course these numbers will vary with gluings and size of blade you cut it to fit. ------------- Wavestone St with Illumina 1.9r, defender1.7b Please let me know if I can be of assistance. |
Posted By: shij421
Date Posted: 12/07/2006 at 12:32pm
|
http://www.sdtta.org/dr_phil_rubber_sheet_weights.html
hope this helps ------------- Violin FL Tenergy 05 2.1 Black Tenergy 05 FX 2.1 Red |
Posted By: SamyBoy
Date Posted: 12/08/2006 at 12:19am
|
Great; thanks a lot for the info:) Cheers |