Print Page | Close Window

New Dignics 09C difference between rubbers

Printed From: Alex Table Tennis - MyTableTennis.NET
Category: Equipment
Forum Name: Equipment
Forum Description: Share your experience and discussions about table tennis equipments.
Moderator: haggisv
Assistant Moderators: position available

URL: http://mytabletennis.net/forum/forum_posts.asp?TID=88949
Printed Date: 11/27/2020 at 9:11am
Software Version: Web Wiz Forums 12.01 - http://www.webwizforums.com


Topic: New Dignics 09C difference between rubbers
Posted By: Claudiu84
Subject: New Dignics 09C difference between rubbers
Date Posted: 10/08/2020 at 9:16am
Hello! I encountered the following situation, and I don't know what to believe ...
Two months ago I bought a 1.9mm D09C from the official Butterfly dealer. One week ago, I bought another 2.1mm D09C from a person who gave it cheaper than the official price.
Now, the differences between the two rubbers purchased are in appearance (the bottom of the rubber, how the 2.1mm was cut, with burr, and the packaging, the lack of TPE stamp on the paper packaging, instead it is applied on the plastic wrap), as seen:

https://postimg.cc/Rq7vjFfN" rel="nofollow">

https://postimg.cc/zyB5bFQg" rel="nofollow">

https://postimg.cc/BjYSMVFp" rel="nofollow">

https://postimg.cc/8jTTDSBw" rel="nofollow">

https://postimg.cc/kBwqgpTC" rel="nofollow">

https://postimg.cc/64fwRjwd" rel="nofollow">

https://postimg.cc/LqGHMgNZ" rel="nofollow">

https://postimg.cc/XZrVhkcb" rel="nofollow">

https://postimg.cc/GTCd4w0L" rel="nofollow">

https://postimg.cc/wyJ9xxG4" rel="nofollow">

What do you guys believe? Both rubbers are real or the 2.1mm is fake?
I only played once the 2.1mm, it seems a little softer than the 1.9, but I could attribute this to the fact that it is thicker... 



Replies:
Posted By: notfound123
Date Posted: 10/08/2020 at 11:46am
perhaps your 2.1 rubber is a factory B-grade .. rubber that didn't pass QC. But honestly I am looking at the photo where you have two paddles side by side and not seeing what you're seeing. Both look fine to me.

-------------
BTY Diode ST | V>15 Extra | Curl P4 1.0


Posted By: Claudiu84
Date Posted: 10/08/2020 at 1:05pm
Look at the burr at the bottom of the trubber, at the handle. It exists, and it's asymmetrical. 


Posted By: tt-panopticum
Date Posted: 10/10/2020 at 10:40am
Butterfly rubbers have individual ser. numbers - you find one of them on the package - and the same one on the sponge. Check this first...
The uneven cut at the bottom line is a typical sign for some fake products and so far I've personally not seen a real one with this problem.
Fake products usually don't use individual ser. numbers - same number is used again and again 
Hope this helps a little bit


Posted By: fmarek
Date Posted: 10/11/2020 at 5:06am
Both are fake. Enough just to look at the price.

-------------
DHS HL5, FH: 729 Battle II Gold H40, BH: Palio HK1997 Gold



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.01 - http://www.webwizforums.com
Copyright ©2001-2018 Web Wiz Ltd. - https://www.webwiz.net