SDC Handmade Blades

One of these blades = Limba-Limba-ALC-Kiri-ALC-Limba-Limba = HL5/W968/Innerforce ALC

Edited by Magic_M - 01/05/2022 at 9:45am

Loosely based on a Stiga Kjell Johansson, a classic look with a modern twist.

Edited by Ergosquare - 12/08/2021 at 5:49pm

Based on a Hugo Hal, a fast attacking blade with a relatively soft feeling.

[QUOTE = Kolev] Bonito aspecto, peso ... y todo. ¿Cuál es su sugerencia OFF, OFF -? [/ QUOTE]

Edited by Hipnotic - 11/22/2021 at 4:09am

Hipnotic wrote: Asymmetric blade, Viscaria structure but with an inner side. Composition: Koto / ALC / Ayous / Kiri / ALC / Ayous / Koto Weight: 84.1g Thickness: 5.8mm Freq.: 1356Hz Balance: 3.0cm (Med)

ALC is one of the easiest to work with. The cut is clean so not much cleaning up is needed to get a good finish. Kevlar is much harder and zylon is the devil's spawn. But that's not what you meant. These fibers are what they are, there is a certain kind of feel people expect when using them, so if a different feel is desired then the best option is to chose a different fiber. Playing with the amount and type of resin takes some of the predictability away, and the result might not be good. That's what I learnt from this blade. In terms of hardness for the hybrid fibers, it goes somewhat like this: I-C < ALC < A-C < ZLC < S A-C < SZLC. And we still have all the plain fibers to throw into the mix. I think we have plenty of options. 

I do that for other fibers. Szlc and zlc differ in weave pattern and weight. I also have two varieties of Kevlar-carbon, Glassfiber and carbon. But for ALC I only have one. 

zeio wrote: Good to know. How much more would the finished blade have weighed if you were to apply the resin in the usual amount? What would you have changed if you had a second chance?