|
|
VOC-Free Glue Sheets (Donic) |
Post Reply | Page 12> |
Author | ||
DreiZ
Platinum Member Joined: 06/01/2009 Location: New York, US Status: Offline Points: 2577 |
Post Options
Thanks(0)
Posted: 05/16/2010 at 1:49am |
|
*updated
has anyone used these voc free glue sheets
this guy in the video is using the Donic brand ones that i found on megaspin
was wondering how good are they in terms of adhesiveness and peeling them off. im kinda tired of the mess the voc free glue makes. also after glueing my bw2 that had a tuning layer on it, after cutting the edges kept peeling off because of tuning....
im thinking of trying the h3 neo that has a slight layer of tuning on it? (if im right), these sheets might be less of a mess to glue the rubber.? |
||
Main:
Ovtcharov Innerforce ALC 85g FH/BH: Glayzer 09C 2.1mm Chopper: Stratus Power Defense 85g FH: Hybrid K3 max BH: Grass D.TecS 0.9mm USATT: 1725 |
||
Sponsored Links | ||
Sallom89
Gold Member Joined: 05/19/2009 Location: Kuwait Status: Offline Points: 1925 |
Post Options
Thanks(0)
|
|
I heard bad things about Yasaka's glue.. Tibhar clean fix and Butterfly freechack are very good, even though I favor butterfly a tiny bit more.
|
||
Member of Wang Hao fan club.
Hurricane Hao III FH: Thors RPB: Omega Pro |
||
despoticwalnut
Super Member Joined: 02/17/2010 Location: United States Status: Offline Points: 365 |
Post Options
Thanks(0)
|
|
How is Donic Vario Clean?
|
||
pingpongrob
Gold Member Joined: 07/09/2007 Location: Australia Status: Offline Points: 1016 |
Post Options
Thanks(0)
|
|
I use it or the Andro free glue for all my bat make ups, and that equates to about 40 a week. never had a problem with either of them. |
||
Distributor for Andro, XIOM, Tibhar, Joola, Dr Neubauer, Donic, DHS, AIR, Dawei, 729 & Yinhe
http://www.affordablett.com.au |
||
despoticwalnut
Super Member Joined: 02/17/2010 Location: United States Status: Offline Points: 365 |
Post Options
Thanks(0)
|
|
Awesome. I was wondering since it's about 6 dollars more for the same amount of free chack. |
||
ohhgourami
Platinum Member Joined: 08/12/2008 Location: SoCal Status: Offline Points: 2341 |
Post Options
Thanks(0)
|
|
so far, nothing beats Nittaky Finezip. only problem is...its the most expensive glue. peels off the sponge really easy! i absolutely love that part about Finezip!
Joola X-glue is decently priced and plays well. Just dont expect to remove the glue from the sponge though... |
||
Custom Walnut 7-ply
DHS H3 Provincial untuned 40° BTY T64 210g |
||
Baal
Forum Moderator Joined: 01/21/2010 Location: unknown Status: Offline Points: 14336 |
Post Options
Thanks(0)
|
|
This is like very old arguments about what is better -- an Olds or a Buick?
|
||
Rich215
Premier Member Joined: 02/28/2008 Location: United States Status: Offline Points: 3488 |
Post Options
Thanks(0)
|
|
Neither! lol I'm more than happy with using Tear Mender now after using Rubber cement when I started. Tear Mender is super cheap and comes of the sponge so easy. |
||
|
||
Imago
Premier Member Joined: 07/19/2009 Location: Sofia Status: Offline Points: 5897 |
Post Options
Thanks(0)
|
|
Do you extra thin it?
|
||
Rich215
Premier Member Joined: 02/28/2008 Location: United States Status: Offline Points: 3488 |
Post Options
Thanks(0)
|
|
Not sure who your asking or which glue your referring to Imago. But Tear Mender does not need thinning. Its like milk and you can apply a pretty thin layer if you want. |
||
|
||
Erikson45
Super Member Joined: 01/17/2009 Location: United States Status: Offline Points: 238 |
Post Options
Thanks(0)
|
|
I enjoy using DHS no.15 glue but recently I've switched to Nitakku Finezip upon hearing from my friend that the Chinese and Japanese teams were using it =o
|
||
Rutis
FH: H3 BH: T64 |
||
figgie
Gold Member Joined: 01/28/2005 Location: United States Status: Offline Points: 1026 |
Post Options
Thanks(0)
|
|
how often do you guys remove the rubber and the other question is, why in the hell would you?
Once I glue, that rubber does not come off my blade until it is going to get replaced. That means 6 months-10 months of playing.
|
||
Speed glue, booster, tuner free since 2006!!!
|
||
geotjakra
Super Member Joined: 02/03/2009 Location: Indonesia Status: Offline Points: 100 |
Post Options
Thanks(0)
|
|
I heard Haifu WBG and a Chinese WBG, "Bian Pie" is very good. I don't know about their availability outside of Indonesia, but here they are two of the most recommended WBG. (caution: Haifu has a very strong urine smell, I personally never use this yet) but I have good experience with Bian Pie, easy to apply and easy to clean when the time come for replacing the rubber.) Bian Pie is sold for around 2-4 US dollars for a 35ml bottle (which probably can stick about 15-20 rubber sheets. (comes with sponges and a clip for holding the sponge).
|
||
Baal
Forum Moderator Joined: 01/21/2010 Location: unknown Status: Offline Points: 14336 |
Post Options
Thanks(0)
|
|
Haifu WBG requires a hair dryer and some patience to use. You will need a lot of layers to get the rubber to stick.
|
||
DreiZ
Platinum Member Joined: 06/01/2009 Location: New York, US Status: Offline Points: 2577 |
Post Options
Thanks(0)
|
|
anyone else tried the yasaka mizunori water based glue?
i need to get a glue with yasaka xtend hs? so i can get free shipping from megaspin.net
so can anyone suggest a good glue on megaspin site?
|
||
Main:
Ovtcharov Innerforce ALC 85g FH/BH: Glayzer 09C 2.1mm Chopper: Stratus Power Defense 85g FH: Hybrid K3 max BH: Grass D.TecS 0.9mm USATT: 1725 |
||
Rich215
Premier Member Joined: 02/28/2008 Location: United States Status: Offline Points: 3488 |
Post Options
Thanks(0)
|
|
Try the Donic Formula First.
|
||
|
||
DreiZ
Platinum Member Joined: 06/01/2009 Location: New York, US Status: Offline Points: 2577 |
Post Options
Thanks(0)
|
|
has anyone used these voc free glue sheets
this guy in the video is using the Donic brand ones that i found on megaspin
was wondering how good are they in terms of adhesiveness and peeling them off. im kinda tired of the mess the voc free glue makes. also after glueing my bw2 that had a tuning layer on it, after cutting the edges kept peeling off because of tuning....
im thinking of trying the h3 neo that has a slight layer of tuning on it? (if im right), these sheets might be less of a mess to glue the rubber.?
so has anyone tried any of the glue sheets?
|
||
Main:
Ovtcharov Innerforce ALC 85g FH/BH: Glayzer 09C 2.1mm Chopper: Stratus Power Defense 85g FH: Hybrid K3 max BH: Grass D.TecS 0.9mm USATT: 1725 |
||
pushchop
Super Member Joined: 03/16/2010 Location: United States Status: Offline Points: 205 |
Post Options
Thanks(0)
|
|
I use Donic Vario Clean Glue, works great. When peeling off old rubber, comes off fairly clean but leaves tiny bits of glue on your blade. Using your fingertips, just brush lightly over the blade face 10 times and it all comes off clean. The sponge clip is very nice. Lets you apply the glue uniformly and thin.
I've used up my bottle of 90ml in last year. It's enough for about 20-30 rubbers. And no, I don't switch rubbers that many times in a year. I help other people reglue out of kindness. I'm not that bad of an EJ. :-) |
||
DreiZ
Platinum Member Joined: 06/01/2009 Location: New York, US Status: Offline Points: 2577 |
Post Options
Thanks(0)
|
|
bump on updated qs?
|
||
Main:
Ovtcharov Innerforce ALC 85g FH/BH: Glayzer 09C 2.1mm Chopper: Stratus Power Defense 85g FH: Hybrid K3 max BH: Grass D.TecS 0.9mm USATT: 1725 |
||
karabijntje
Super Member Joined: 04/09/2010 Location: Netherlands Status: Offline Points: 233 |
Post Options
Thanks(0)
|
|
I usually reglue them once again, usually after about 2months (I'm mostly getting new ones after about 3-4 months. They feel more fresh and lively again for me. |
||
* TBS - Color - Spear - Virtuoso+
* Vega Pro / Europe |
||
dauntless
Gold Member Joined: 10/06/2007 Location: United States Status: Offline Points: 1471 |
Post Options
Thanks(0)
|
|
I have used Yasaka glue. TERRIBLE. HORRIBLE. AWFUL. Waste of money.
Nittaku Finezip is the best water based glue out there. Works like a champ. |
||
1. BTY Primorac, Nittaku H3N, T64 2. BTY Primorac, H3N, Mendo MP Feedback
|
||
DreiZ
Platinum Member Joined: 06/01/2009 Location: New York, US Status: Offline Points: 2577 |
Post Options
Thanks(0)
|
|
where can you get nittaku finezip (US stores)? i dont feel like paying alot for shipping from other countries. and bump on my second q about the Donic Glue Sheets
ps dauntless ur sig is awesome
|
||
Main:
Ovtcharov Innerforce ALC 85g FH/BH: Glayzer 09C 2.1mm Chopper: Stratus Power Defense 85g FH: Hybrid K3 max BH: Grass D.TecS 0.9mm USATT: 1725 |
||
dauntless
Gold Member Joined: 10/06/2007 Location: United States Status: Offline Points: 1471 |
Post Options
Thanks(0)
|
|
paddlepalace is the place to get it. thanks, did it in PS CS4 |
||
1. BTY Primorac, Nittaku H3N, T64 2. BTY Primorac, H3N, Mendo MP Feedback
|
||
DreiZ
Platinum Member Joined: 06/01/2009 Location: New York, US Status: Offline Points: 2577 |
Post Options
Thanks(0)
|
|
hey dauntless clear ur pm box
|
||
Main:
Ovtcharov Innerforce ALC 85g FH/BH: Glayzer 09C 2.1mm Chopper: Stratus Power Defense 85g FH: Hybrid K3 max BH: Grass D.TecS 0.9mm USATT: 1725 |
||
dauntless
Gold Member Joined: 10/06/2007 Location: United States Status: Offline Points: 1471 |
Post Options
Thanks(0)
|
|
Sorry, didn't realize it was full. |
||
1. BTY Primorac, Nittaku H3N, T64 2. BTY Primorac, H3N, Mendo MP Feedback
|
||
peter79
Premier Member Joined: 07/05/2006 Location: Indonesia Status: Offline Points: 3393 |
Post Options
Thanks(0)
|
|
Dauntless, is your tenergy shrink using finezip? How many layers do you put the finezip on your tenergy?
|
||
Andro Wanokiwami AO Offensive 83 gr
H3 National Orange 40 deg 2.2 Baracuda Max 182 Gr |
||
dauntless
Gold Member Joined: 10/06/2007 Location: United States Status: Offline Points: 1471 |
Post Options
Thanks(0)
|
|
i have no shrink it is a new sheet. i just wonder how it will behave. finezip normally produces no irregularity in size like voc can do.
|
||
1. BTY Primorac, Nittaku H3N, T64 2. BTY Primorac, H3N, Mendo MP Feedback
|
||
peter79
Premier Member Joined: 07/05/2006 Location: Indonesia Status: Offline Points: 3393 |
Post Options
Thanks(0)
|
|
Dauntless, I''ve seen your review at paddle palace about finezip. You said that you have difficulties attaching your rubber with finezip on your 2 layer water based sealed blade.
How many layers do you put? Has this problem solved now? I also sealed 2 thin coats on water base sealer on my Acoustic, I put 5 layers of haifu WBG, it stick very well, only the part of the rubber where I put my index finger that is peeled off because my index finger keep pressing the rubber. I pull it off then reglue it, put more glue on the area which peels off, now it stick very well. |
||
Andro Wanokiwami AO Offensive 83 gr
H3 National Orange 40 deg 2.2 Baracuda Max 182 Gr |
||
AllezCho
Super Member Joined: 03/24/2010 Location: United States Status: Offline Points: 434 |
Post Options
Thanks(0)
|
|
I also use Nittaku Finezip (recommended to me by my coach) and it works fine to simply attach a rubber to a blade. Nothing extraordinary, nothing special, nothing bad either. Like other water-based glues, it is very difficult to pull off the sponge. The only downside is the price, it is one of the most expensive glues. But hey, it works, why risk experimenting with other glues that might mess up your rubbers/blades?
|
||
Viscaria
T05/T64 |
||
dauntless
Gold Member Joined: 10/06/2007 Location: United States Status: Offline Points: 1471 |
Post Options
Thanks(0)
|
|
It was because I did not let it become entirely clear. I tried it again later (my review had a follow up) and it worked great! |
||
1. BTY Primorac, Nittaku H3N, T64 2. BTY Primorac, H3N, Mendo MP Feedback
|
||
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Forum Home | Go to the Forums | Forum Help | Disclaimer
MyTableTennis.NET is the trading name of Alex Table Tennis Ltd. |